Machinist - Overnights (Des Moines)
Sign up free to see how well your resume matches this role.
What you'll do
- Set up and operate Computer Numerically Controlled (CNC) machining centers (horizontal machining center/vertical machining center, 3–4-axis), CNC turning centers, press brakes, lasers, drills, benders, and plate cutters (e.g., Fanuc, Siemens, HAAS controls) to manufacture parts to precise specifications.
- Read and interpret blueprints and Geometric Dimensioning and Tolerancing (GD&T); select tooling, work-holding fixtures, and load programs to meet tight tolerance requirements.
- Make basic program edits at the control and update tool and work offsets (G54–G59) as directed.
- Use micrometers, calipers, and height gauges to verify part quality; document results and consistently hold tight tolerances.
- Safely load and unload raw materials and finished products, operating overhead/jib cranes and hoists, and following rigging, Environmental Health and Safety (EHS), Lockout/Tagout (LOTO), and Personal Protective Equipment (PPE) procedures.
- Apply shop math, including decimals, fractions, and basic trigonometry, to support accuracy, cycle time, and process optimization.
- Meet rate and throughput targets with minimal scrap; perform routine equipment checks and Total Preventative Maintenance (TPM); support 5S/lean initiatives and contribute to Continuous Improvement (CI/kaizen) by escalating issues to protect uptime.
What they're looking for
- Ability to successfully complete Vermeer Machining Training Program.
- Ability to learn and apply techniques for verifying part quality using micrometers, calipers, and height gauges; document results and maintain tight tolerances.
- Readiness to set up and operate CNC machining centers, CNC turning centers, press brakes, lasers, drills, benders, and plate cutters.
- Capacity to read and interpret blueprints and GD&T; select tooling, work-holding fixtures, and load programs to meet tolerance requirements; make basic program edits at the control and update tool/work offsets as directed.
- Commitment to safety, equipment care, and workplace organization, including performing TPM, following EHS, LOTO, and PPE procedures, and supporting 5S and Continuous Improvement.
Nice to have
- Entry-level machining experience or formal training (technical school, apprenticeship, or equivalent) preferred.
Summarised by NextRaise from the employer’s description, which follows in full below.
Full description from employer
Who We Are
Vermeer equips customers doing important work around the world. We are global, driven by innovation and growing. The equipment we make manages natural resources, connects people and feeds and fuels communities. We live out a caring culture, we demonstrate agility, we keep a focus on customers and are stewards of our resources. These beliefs drive our culture, determine how we treat others and steer our business.
Â
Work Shift
3 - Third ShiftHourly Wage Range
$26.20 - $28.87Â
Job Summary
Are you ready to launch your career in advanced manufacturing? As a Machinist I at Vermeer, you’ll learn to set up and operate precision machining equipment to produce high-quality parts. Join a team that values safety, continuous improvement, and craftsmanship as you help shape raw materials into essential components for Vermeer’s world-class equipment.What You’ll Do
1. Set up and operate Computer Numerically Controlled (CNC) machining centers (horizontal machining center/vertical machining center, 3–4-axis), CNC turning centers, press brakes, lasers, drills, benders, and plate cutters (e.g., Fanuc, Siemens, HAAS controls) to manufacture parts to precise specifications.
2. Read and interpret blueprints and Geometric Dimensioning and Tolerancing (GD&T); select tooling, work-holding fixtures, and load programs to meet tight tolerance requirements.
3. Make basic program edits at the control and update tool and work offsets (G54–G59) as directed.
4. Use micrometers, calipers, and height gauges to verify part quality; document results and consistently hold tight tolerances.
5. Safely load and unload raw materials and finished products, operating overhead/jib cranes and hoists, and following rigging, Environmental Health and Safety (EHS), Lockout/Tagout (LOTO), and Personal Protective Equipment (PPE) procedures.
6. Apply shop math, including decimals, fractions, and basic trigonometry, to support accuracy, cycle time, and process optimization.
7. Meet rate and throughput targets with minimal scrap; perform routine equipment checks and Total Preventative Maintenance (TPM); support 5S/lean initiatives and contribute to Continuous Improvement (CI/kaizen) by escalating issues to protect uptime.
What We’re Looking For
- Entry-level machining experience or formal training (technical school, apprenticeship, or equivalent) preferred.
- Ability to successfully complete Vermeer Machining Training Program.
- Ability to learn and apply techniques for verifying part quality using micrometers, calipers, and height gauges; document results and maintain tight tolerances.
- Readiness to set up and operate CNC machining centers, CNC turning centers, press brakes, lasers, drills, benders, and plate cutters.
- Capacity to read and interpret blueprints and GD&T; select tooling, work-holding fixtures, and load programs to meet tolerance requirements; make basic program edits at the control and update tool/work offsets as directed.
- Commitment to safety, equipment care, and workplace organization, including performing TPM, following EHS, LOTO, and PPE procedures, and supporting 5S and Continuous Improvement.
Travel
- No travel is expected of this position.Â
Essential Functions
Standing: Frequently
Sitting: Frequently
Walking: Frequently
Hand Coordination: At least average/bilateral
Twisting: Rarely (up to 1 minute in position)
Bending - Trunk: Rarely (up to 1 minute in position)
Bending - Neck: Occasionally (up to 25 degree flex & 30 degree extension for up to 2 minutes)
Elevated Work/Reach: Rarely (up to 1 minute in position)
Squatting/Kneeling: Rarely (up to 1 minute in position)
Climbing: Rarely
Pulling: Rarely (up to 80 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
Pushing: Rarely (up to 80 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
RH Grip: Rarely (up to 80 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
LH Grip: Rarely (up to 80 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
RH Pinch: Rarely (up to 15 lbs) Occasionally (up to 5 lbs) Frequently (up to 2 lbs)
LH Pinch: Rarely (up to 15 lbs) Occasionally (up to 5 lbs) Frequently (up to 2 lbs)
Floor to Waist Lift: Rarely (up to 50 lbs) Occasionally (up to 20 lbs)
Horizontal Lift: (up to 50 lbs) Occasionally (up to 20 lbs) Frequently (up to 10 lbs)
Waist to Crown Lift: Rarely (up to 40 lbs) Occasionally (up to 5 lbs)
Work Location
ONSITE: A team member’s day-to-day work is best done on a Vermeer campus. If work content can be occasionally completed at an offsite location, discuss potential arrangements with your manager.Equal Opportunity Employer
At Vermeer Corporation, we believe in the value of your unique identity, background, and experiences. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, marital status, genetic information, disability, sexual orientation, gender identity, veteran status or any other status protected by the law. Applicants requiring a reasonable accommodation due to a disability at any stage of the employment application process should contact Team Member Solutions at (641) 621-8767 or at hr@vermeer.com.
Interested? We’d love to get to know you.
Company
Company facts come from this company's own listings. We only show what the postings themselves carry.