Boyd Thermal by Eaton - CMM Programmer
Sign up free to see how well your resume matches this role.
What you'll do
- Write, edit, debug, and release PC-DMIS measurement programs for Hexagon CMMs from engineering drawings and 3D CAD.
- Interpret and apply ASME Y14.5 GD&T, including true position, profile, runout, and datum reference frames.
- Build stable alignments and collision-safe DCC probe paths; qualify probes and manage stylus builds.
- Prove out new programs on the machine and document fixture setup, probe files, and operator run instructions.
- Support first-article, incoming, in-process, and final dimensional inspection as required by the quality system.
- Review CMM results, identify out-of-tolerance conditions, and work with Quality and Operations on next steps.
- Maintain the program library and revision control so trained inspectors can run released programs.
- Train Quality inspectors to execute released programs and perform basic program operation.
- Use PC-DMIS Offline programming when available so the CMM stays available for measurement.
- Coordinate routine CMM care and Hexagon service support as needed.
What they're looking for
- 3+ years of experience writing production CMM programs in PC-DMIS (creating programs, not only running them).
- Experience operating Hexagon or comparable DCC CMMs.
- Ability to program from CAD models and from 2D drawings.
- Working knowledge of GD&T and how to measure it correctly on a CMM.
- Ability to prove out programs, document setups, and work on a manufacturing shop floor.
- High school diploma or equivalent.
- Must be able to work on-site in Woburn, MA.
Nice to have
- PC-DMIS 2020 or newer; scanning / analog probe experience.
- PC-DMIS Offline programming and collision simulation.
- Experience inspecting machined, brazed, or fabricated metal components.
- Hexagon or PC-DMIS formal training; ASME Y14.5 coursework.
- Exposure to FAI, PPAP, MSA / GR&R, and ISO / IATF / AS9100 quality systems.
- Associate degree in a technical field.
Summarised by NextRaise from the employer’s description, which follows in full below.
Full description from employer
Job Description
Boyd / Eaton • Woburn, Massachusetts
Job Description • CMM Programmer (PC-DMIS) • Page 1
CMM Programmer (PC-DMIS)
Quality • Full-time • On-site • Woburn, MA
About the Role
Boyd / Eaton in Woburn is hiring a CMM Programmer to write, prove out, and maintain inspection
programs on Hexagon coordinate measuring machines using PC-DMIS. This person owns dimensional
inspection programming for production and first-article work so Quality can measure parts accurately,
repeatably, and without depending on a single individual.
The CMM Programmer works on the floor with Quality, Manufacturing, and Engineering. The job is hands-
on: CAD and prints in, safe DCC programs out, inspectors trained to run released routines.
Responsibilities
• Write, edit, debug, and release PC-DMIS measurement programs for Hexagon CMMs from
engineering drawings and 3D CAD.
• Interpret and apply ASME Y14.5 GD&T, including true position, profile, runout, and datum reference
frames.
• Build stable alignments and collision-safe DCC probe paths; qualify probes and manage stylus builds.
• Prove out new programs on the machine and document fixture setup, probe files, and operator run
instructions.
• Support first-article, incoming, in-process, and final dimensional inspection as required by the quality
system.
• Review CMM results, identify out-of-tolerance conditions, and work with Quality and Operations on
next steps.
• Maintain the program library and revision control so trained inspectors can run released programs.
• Train Quality inspectors to execute released programs and perform basic program operation.
• Use PC-DMIS Offline programming when available so the CMM stays available for measurement.
• Coordinate routine CMM care and Hexagon service support as needed.
Required Qualifications
• 3+ years of experience writing production CMM programs in PC-DMIS (creating programs, not only
running them).
• Experience operating Hexagon or comparable DCC CMMs.
• Ability to program from CAD models and from 2D drawings.
• Working knowledge of GD&T and how to measure it correctly on a CMM.
• Ability to prove out programs, document setups, and work on a manufacturing shop floor.
• High school diploma or equivalent.
• Must be able to work on-site in Woburn, MA.
Boyd / Eaton • Woburn, Massachusetts
Job Description • CMM Programmer (PC-DMIS) • Page 2
Preferred Qualifications
• PC-DMIS 2020 or newer; scanning / analog probe experience.
• PC-DMIS Offline programming and collision simulation.
• Experience inspecting machined, brazed, or fabricated metal components.
• Hexagon or PC-DMIS formal training; ASME Y14.5 coursework.
• Exposure to FAI, PPAP, MSA / GR&R, and ISO / IATF / AS9100 quality systems.
• Associate degree in a technical field.
Work Environment
This is an on-site role in a manufacturing quality lab and production environment in Woburn. The work
involves standing at the CMM, handling parts and fixtures, and occasional lifting up to 35 lb with
assistance as needed. PPE is required per site rules.
How to Apply
Submit a resume that shows specific PC-DMIS programming experience: software versions used, types of
parts programmed, and whether you wrote programs from CAD. Candidates who have primarily run
programs written by others will not be a fit
Compensaton $90,000- $100,000 and bonus eligible.
All Job Posting Locations
Woburn
Remote Type
On-SiteEEO Statement
Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.
Company
Company facts come from this company's own listings. We only show what the postings themselves carry.